1、 Metal storage tanks such as carbon steel tanks, stainless steel tanks, aluminum tanks, etc. Non metallic storage tanks, including plastic tanks, ceramic tanks, fiberglass tanks, etc. Metal non-metal composite tanks, steel lined polytetrafluoroethylene tanks, steel lined polyethylene tanks, steel lined polyolefin tanks, steel lined rubber tanks, etc. are included in 1 The welding free plastic (polyethylene) storage and transportation equipment series is non-metallic plastic cans: this series of products is made of our company's unique formula modified polyethylene (PE) as raw material, using a special one-time integral molding process (rolling molding process). This plastic storage tank does not use any additives or plastic fillers during the production process. Completely processed using the company's unique formula, added

Stainless steel storage tank inspection is divided into external inspection, internal inspection, and inspection. The periodic inspection of stainless steel storage tanks should be determined based on the technical usage conditions of the tanks. Generally speaking, external inspections should be conducted at least once a year, internal inspections should be conducted at least once every 3 years, and inspections should be conducted at least once every 6 years. If the service life of stainless steel storage tanks exceeds 15 years, internal and external inspections must be conducted every two years. If the service life reaches 20 years, internal and external inspections must be conducted at least once a year. 1、 Internal inspection: 1. Check for corrosive wear on the inner surface and manhole connections of the storage tank, as well as on welds, transition zones of heads, or other areas of stress concentration

1. Preparation before cleaning: (1) Cut off the power supply: stop the wall circulation pump and stop the cooling water circulation; Turn off the power supply of the axial flow fan. (2) Close valves: Close the inlet and outlet valves. (3) Personnel protection: Construction personnel should wear protective clothing and masks, as well as plastic shoes and gloves. Attention should be paid to personal safety and labor protection during cleaning construction. 2. Chemical cleaning process and implementation: Due to the unique structure of evaporative condensers, the packing and condensing coils are suspended and completely exposed to the air, making it impossible to perform immersion chemical cleaning; And the structural conditions of each component are also different, so we adopt

1. Regularly inspect all sealing surfaces and welds of the plate heat exchanger to observe for any abnormal phenomena such as leakage. If leakage is found, mark the leakage area in a timely manner and deal with it after the plate heat exchanger is shut down. 2. Plate heat exchangers should be checked regularly for pressure gauges and thermometers to observe for any abnormal phenomena. 3. When stopping the plate heat exchanger, slowly close the inlet valves of the hot and cold media, and then close the outlet valves of both media. When starting up, do the opposite. First open the outlet valve, and then slowly open the inlet valve. 4. Regularly test the low-pressure side medium to prevent the mixing of high-pressure side medium. If there is any mixing, it indicates internal leakage. Replace the plate type

A heat exchanger is an energy-saving and environmentally friendly equipment that maintains heat transfer from raw materials between two or more fluids at different temperatures. It transfers heat from fluids with higher temperatures to fluids with lower temperatures, ensuring that the fluid temperature meets the required standards for processing technology. Additionally, it is one of the key machinery and equipment for improving the utilization rate of electrical energy. But many people don't know the difference between single tube plate and double tube plate heat exchangers. Below, the editor will share it with you. A heat exchanger is an energy-saving and environmentally friendly equipment that maintains the heat transfer of raw materials between two or more fluids at different temperatures. It is used to transfer the heat generated by the higher temperature

With the continuous improvement of science and technology, more and more scientific instruments are being invented. Double tube plate heat exchangers are also constantly being manufactured. Double tube plate heat exchangers are a type of shell and tube heat exchanger, mainly used when two media cannot be mixed. So what is its principle? With the continuous improvement of science and technology, more and more scientific instruments are being invented. Double tube plate heat exchangers are also constantly being manufactured. Double tube plate heat exchangers are a type of shell and tube heat exchanger, mainly used when two media cannot be mixed. So what is its principle? Double tube plate heat exchanger is a device that enables heat exchange between materials